Monitoring Sensor Values

Using the Sensor Grid to monitor sensor values in real-time is a piece of cake!

1. Establish a connection with a vehicle.
2. Select the Sensor Grid tool from the tool selection combobox.
3. Put a checkmark beside each of the available sensors that you'd like to monitor. When checked, the sensor should immediately appear in the grid.
4. Specify whether you want English, Metric, or both units displayed by selecting the appropriate radio button in the Display group.
5. Watch as the values are updated in real-time!

NOTE: The speed of most OBD-II connections is relatively slow. Therefore, you should keep in mind that the more sensors you select to monitor simultaneously, the slower the refresh rate will be. You can attempt to improve the refresh rate by specifying a shorter timeout value for the ELM microcontroller under ProScan Preferences.